Q: Where do I find my identifiers and credentials?
A: Go to

Step 2:
Click the link to authorize CSP for the vendor codes.

Step 3:
Enter the following 8 digit passcode into the box highlighted in yellow below.


Then, click the verify passcode button.

Step 4:
You should see the following success message and you should now be able to select the vendor code/s to authorize:

Important - Note down the vendor code/s - you'll need them to activate Amazon in Tagglo

Step 5:

You should now see a token (in red) on the screen:

Final Step:
Copy and send the token from Step 5 and the vendor codes from Step 4 to so that we can activate the channel for you.

Did this answer your question?